[Home] [Products] [MSDS] [Contact Us]

MATERIAL SAFETY DATA SHEET
Date Prepared: 03/20/2005
MSDS No: 021
PermaLine

-----------------------------------------------------------------------------
1. Chemical Product and Company Identification 
-----------------------------------------------------------------------------
Product Identifier: PermaLine
Manufacturer 

-----------------------------------------------------------------------------
2. Composition/Information on Ingredients 
-----------------------------------------------------------------------------

# Denotes toxic chemicals subject to the reporting requirements of Section 313 of SARA Title III.
* N/D = Not Determined

-----------------------------------------------------------------------------
3. Hazards Identification 
-----------------------------------------------------------------------------
Emergency Overview

Respirable crystalline quartz has been found to be a suspected carcinogen
by NTP, although no exposure is expected through the use of this material.
This material has not been tested in long term chronic exposure tests.

Potential Health Effects
Eyes: Can cause severe eye irritation.
Skin: Appropriate measures should be taken to prevent absorption.
Ingestion: Do not ingest.

Signs and Symptoms of Overexposure
Eyes: Cause severe eye irritation.
Skin: May cause skin irritation.
Ingestion: Substance may be harmful if swallowed.
Inhalation: Excessive inhalation may cause headaches, dizziness or nausea.
Acute Effects: Not Established

-----------------------------------------------------------------------------
4. First Aid Measures 
-----------------------------------------------------------------------------
Eyes: Flush eye with water for 15 minutes. Get medical attention.
Skin: Wash with soap and water. Get medical attention if irritation develops
or persists.
Ingestion: Get medical attention immediately. 
Inhalation: If exposed to excessive levels of dusts or fumes, remove to fresh
air and get medical attention if cough or other symptoms develop.
Antidotes: If swallowed, do NOT induce vomiting. Give victim a glass of water
or milk. Call a physician or poison control center immediately. Never give
anything by mouth to an unconscious person.

-----------------------------------------------------------------------------
5. Fire Fighting Measures 
----------------------------------------------------------------------------- 
Comments: Not Established
Flashpoint and Method: >200 degrees F
Comments: Not Established
Autoignition Temperature: None
Comments: None
Hazardous Combustion Products: Not Established
Other Considerations: "Empty" containers retain product residue (liquid
and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE
INJURY OR DEATH. Empty drums should be completely drained, properly bunged
and promptly returned to a drum reconditioner, or properly disposed of.
General Hazard: This material is a water based emulsion. It does not support
combustion.
Fire Fighting Equipment: As in any fire, wear self-contained breathing
apparatus pressure-demand, (MSHA/NIOSH approved or equivalent) and full
protective gear.

Flammable Class: 3B.
Flame Propagation or Burning Rate of Solids: Not yet Determined
Fire Explosion: None

Fire Fighting Procedures: Use alcohol foam, carbon dioxide, or water spray
when fighting fires involving this material. Water cool sealed containers in
area of fire to prevent rupture due to steam generation.

Explosion Hazards: None

Extinguishing Media: Use water fog, carbon dioxide, foam, or dry chemical to
extinguish the fire.

Sensitive Static Discharge: Not Established
Sensitivity to Impact: None

-----------------------------------------------------------------------------
6. Accidental Release Measures 
-----------------------------------------------------------------------------
Small Spill: Avoid exposure to heat, sparks and flame. Avoid hot metal
surfaces. Absorb spill with suitable material. In soil, recover the spilled
material, put in closed containers for disposal. Dispose in a safe manner in
accordance with local, state and federal regulations. On water, stop the leak
and prevent it from spreading. Notify the proper authorities. Avoid runoff
into storm sewers and ditches which lead to waterways. Do not flush to
sewer.

Large Spill: For large spills, dike the area and pump into closed containers.
Prevent this material from entering waterways.

Water Spill: This material is a water pollutant and should be prevented from
contaminating soil or from entering sewage and drainage systems and bodies of
water.

Special Protective Equipment: Wear protective clothing during cleanup.

General Procedures: Keep spectators away from spill. Surface may be slippery,
use care to avoid falling.

-----------------------------------------------------------------------------
7. Handling and Storage 
-----------------------------------------------------------------------------
Handling: Wash thoroughly after handling.
Storage: Keep away from heat, sparks and flame.
Loading Temperature: Not Established
Storage Temperature: 32 degrees F to 150 degrees F
Comments: Keep from freezing.
Loading/Unloading Viscosity: Not Determined
Storage Pressure: Not Determined
General Procedures: Follow all MSDS/label precautions even after container is
emptied because they may retain product residues.
Electrostatic Accumulation Hazard: None

-----------------------------------------------------------------------------
8. Exposure Controls/Personal Protection 
-----------------------------------------------------------------------------
Eyes and Face: Wear safety glasses with side shields (or goggles) and a face
shield.
Protective Clothing: Long sleeve shirts and pants are recommended while using
this product. Product may adhere to skin.
Skin: Rubber gloves are recommended while handling this product
Respiratory: Wear appropriate, properly fitted respirator ( NIOSH/MSHA ).
During spray applications to protect against overspray.

-----------------------------------------------------------------------------
9. Physical and Chemical Properties 
-----------------------------------------------------------------------------
Physical State: Liquid
Appearance: Colored liquid
Color: Yellow, white, red, blue, black.
Vapor Pressure: None
Freezing Point: 32 degrees F
Melting Point: Not Available
Boiling Point: 212 degrees F
pH: 7.0 to 10.0
Evaporation Rate: <1
Density: 10.8 at 77 degrees F
Odor: Sweet scent characteristic of latex
Percent Volatile: 48
Specific Gravity: 1.2 to 1.4
Viscosity: Not Available
Vapor Density: Heavier
Water Solubility: Completely Miscible

-----------------------------------------------------------------------------
10. Stability and Reactivity 
-----------------------------------------------------------------------------
Stable: Yes
Hazardous Polymer: No
Stability: Stable.
Polymerization: None.
Conditions to Avoid:
Incompatible Materials: This material will react violently with any
material that reacts with water, such as concentrated sulfuric acid, sodium
metal, calcium carbide, etc.

Hazardous Decomposition: Stable. However, may decompose if heated. Carbon
monoxide, carbon dioxide. Gases may be generated.

Notes: Avoid temperatures above 200 F (93 C)

-----------------------------------------------------------------------------
11. Toxicological Information 
-----------------------------------------------------------------------------

-----------------------------------------------------------------------------
12. Ecological Information 
-----------------------------------------------------------------------------
Environmental Data: None

-----------------------------------------------------------------------------
13. Disposal Considerations 
-----------------------------------------------------------------------------
Disposal Method: Liquid material should be considered a hazardous waste and
subject to hazardous waste regulation for diposal. Dispose of the dried
material in a safe manner in accordance with federal, state, and local
regulations. Do not dispose of by means of sinks, drains, or in the immediate
environment. Empty drums should be completely drained, properly bunged, and
returned to a drum reconditioner. Drill a hole in the bottom of empty pails
to prevent drowning of small children.

-----------------------------------------------------------------------------
14. Transport Information 
-----------------------------------------------------------------------------

-----------------------------------------------------------------------------
15. Regulatory Information 
-----------------------------------------------------------------------------
SARA Title III (Superfund Amendments and Reauthorization Act)
313 Reportable Ingredients: None

-----------------------------------------------------------------------------
16. Other Information 
-----------------------------------------------------------------------------
Approval date: 05/19/2005
Approved by: Greg Houser Title: V. P. Manufacturing
Reason for Issue: New Format
Revision Summary: New MSDS
Information Contact: 1.800.543.7077

(Health, Fire, Reactivity, Protection)

This information is provided in good faith and correct to the best of Neyra Industries, Inc. knowledge as of the date here of; however, Neyra Industries, Inc. makes no representation as to its completeness or accuracy. Customers are encouraged to make their own determination as to the suitability of this product for their purpose prior to use. Neyra Industries, Inc. disclaims responsibility to damages of any kind resulting from the use of this information.

THERE ARE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS INFORMATION OR TO THE PRODUCT IT DESCRIBES.
 

                                            [Home] [Products] [MSDS] [Contact Us]

Copyright © 2009 Neyra Industries, Inc.